In order to properly lift a car to change a wheel or intervene under the vehicle easily, getting the best hydraulic jack is essential to combine speed and safety. There are many different brands and models, so how do you make the right choice and buy a jack that is right for you? We have prepared a buying guide on this subject, consult it immediately in order to have all the cards in hand to choose the right product.
The best hydraulic jacks in comparison
First, it is essential to think about the material of the equipment, which should be steel floor since it resists higher weights. However, aluminium works best. If you need a model that weighs a little less. Then you should check the load volume, which is usually measured in tons and is often 1 or 2. Although some different models raise to 3 tons.
We must consider the lifting speed. This is measured in how many times you have to operate the device to load its limit volume, and it is usually ten times. Finally, the elevation range and the design are checked. In the case of big vehicles, you need a jack that reaches enough height. For low profile cars, low elevators are recommended.
Now we invite you to choose one of our comparative list with the best models in the market.
1. Hydraulic jack Rodcraft RH 135 (1,3 tons, 80-540 mm)
Lift any lightweight car with this hydraulic jack, 1.3-ton capacity and a range of elevation between 8 and 54 cm. It is a very resistant and robust model that withstands many uses without yielding or losing position, so it will make you feel calm under the car. It has rotating wheels on the part of the handle to facilitate the transfer.
2. Hydraulic jack Unitec 10022
hydraulic jack that has a capacity of a ton and half that works well for both the garage of your home and for a mechanical workshop. It is made with an aluminium base and is rigid and high quality. It protects the car with the included rubber block and comes with a fairly long and easy-to-use handle, so you do not have to work when you operate it.
3. Hydraulic Jack, Load Capacity 2 T Michelin 92416
Being a leading brand in tires and mechanics, it is not surprising that this Michelin hydraulic skate or trolley jack is so good. It has a load capacity of 2 ton and a lifting range of 10.5 to 35 cm. The wheels and body are made of steel and include a rubber block on the base in contact with the car.
4. Sealey 1025HL 2.25 TON high lift hydraulic jack
This high lift hydraulic jack allows a significant elevation of 15 to 53.5 cm. It is also having the ability to carry up to 2.25 tons of weight and is made of steel, so you know that it has the necessary resistance to give you peace of mind in your car repairs or even DIY jobs. Besides, it weighs 20 kg and the lever measures 60 cm.
5. Metalworks CAT25TL trolley jack
This is not a bottle model, but a hydraulic jack, which has a capacity of 2.5 tons, rims made with steel for greater durability and the body made of steel. It has a low profile for low cars that allows it to reach up to 3.5 inch, while the highest point is 17 inch. The wheels near the handle are rotating.
There are many hydraulic jacks on the market that you can buy. We have presented 5 models that deserve attention. Always remember that before lifting a vehicle, make sure you use the right equipment for the purpose.
6. Draper 31481 low profile hydraulic jack
It has a folding bar to climb the vehicle. The bar has in its lower part a protective rubber that avoids damaging the car body by inserting it underneath. Professional hydraulic jack of robust construction and low profile to access those especially low vehicles. It has a double piston/cylinder for a climb with less effort, greater capacity and safety when maintaining the vehicle. With the same bar, we can control the descent of the jack without having to bend down to open the valve.
What is hydraulic jack?
The hydraulic jack is a lifting tool composed of a jack and a removable lever. It is very popular with mechanics because it is a professional device and it is the ultimate workshop jack. It is used for lifting vehicles, for example, to change the oil if there is no engine oil drain pump. It can be used for example for lifting light vehicles. It is mounted on casters and can lift loads of several tonnes. It allows you to intervene safely in the event of an automobile breakdown. Its implementation is carried out very quickly. What differentiates it from a bottle jack is that it is more complete and more efficient. It has three constituent elements:
- A chassis with small wheels
- A hydraulic cylinder
- A lifting disc
Reasons to buy hydraulic jack
Since you are not immune to a breakdown or a puncture, it is necessary to have a good jack to troubleshoot your vehicle. The hydraulic jack, therefore, appears to be the tool that can facilitate this task. Unlike conventional jacks, the hydraulic model is very solid and does not deform under the weight of the vehicle. Being more stable, it minimizes positioning problems, and therefore the risk of falling the vehicle. So you can work under your vehicle safely. In addition, the hydraulic jack has the ability to raise your vehicle with lightning speed.
In reality, thanks to the efficiency of its lever, you can reach the maximum height in less than a minute. This speed saves you time and repairs your vehicle quickly. In addition, you provide less physical effort to lift your vehicle. So you also save energy. Finally, the hydraulic jack is mobile, and therefore easy to move. This equipment is very robust. Made of solid metal, the hydraulic jack can be used for a long time. There is no point in rushing to buy any product. Your choice must be made on the basis of certain criteria.
How hydraulic jack works?
Hydraulic pressure creation moves oil between two cylinders. When pulling the plunger backwards the pump opens a valve that supplies oil to the pump chamber. When pressed down, the oil passes through an external valve and in the cylinder chamber. The suction valve closes and causes pressure in the chamber. Here, the piston in the camera moves up and thus raises the vehicle
How to use hydraulic jack?
Using a hydraulic jack is very simple and much easier than with a traditional mechanical jack. First, you just need to place the car on a flat and stable floor.
The second step is to properly block the wheels opposite the lifting side to prevent any eventuality as a safety measure.
Third, find what is called the lifting point on your vehicle, where the jack should be placed. If you cannot find it, refer to your car manual which will explain how to find it.
Then you will just have to place in this place the best hydraulic jack that you will have found thanks to our article, then to make it rise by pumping system with the handle provided for this purpose. It is then recommended to place candles to avoid any problem in case the jack should move.
What to look for when choosing hydraulic jack?
If you are seriously considering acquiring a tool like this, you must first be clear about a number of aspects in order to 100% choose the best hydraulic jack. So I’m going to give you a series of tips that you have to look at.
Type
The first thing you have to keep in mind is that there are different types of hydraulic jacks, not all of them have the same uses. So, you have to think about what needs you have and what would be the most appropriate for it.
One of the most common are the trolley jacks, which are very comfortable to use due to their wheels and are capable of lifting a car from virtually any point. There are also hydraulic bottle jacks, which are much smaller and lighter than forklift trucks, and also tend to lift more weight.
Lifting range
Another aspect that you have to pay attention to when choosing a hydraulic jack is its lifting range. You have to know that each model is capable of lifting objects at different height levels, they have a maximum and minimum elevation range.
Depending on your interests and the use that you are really going to give it, you will opt for one with avery good rank or a more normal one. This feature is usually related to the price of the tool, however, you can find a model with a good range without having to have a high price.
Capacity
Just as you have to look at the height range, it is essential to take into account the load capacity of the hydraulic jack, since this figure will indicate which object can and cannot lift.
Taking into account that the main function of this tool is to lift things, usually very heavy, such as cars, the load capacity is usually very high, we are talking about tons.
It is also important that you pay attention to the weight of your car, as well as the objects that are going to be lifted.
Design
It is important that you pay close attention to its design and the quality of the hydraulic jack. Many times we focus only on finding a product that is cheap and we do not take into account this aspect that is very important. And it is because if the design is good, the product will last you much longer and, after all, it will be a good investment.
As I have already told you before, there are cylinder models with a cylindrical shape, others with triangular bases. There are some that have wheels, a positive factor without a doubt, but there are also other models that do not incorporate, etc.
